12″ Fifth Wheel to Goose Neck Adapter with 7 3/4″ Forward Offset

The T Built adapter hitch allows you to convert your 5th wheel into a gooesneck. Now you don’t have to have the bed of your truck tied up with a large 5th wheel plate.
Comes with the required hardware and has a total height of 13.5″ or 11″ from the top of the ball to the top of the mounting plate.
12″ Tall

T Built Adapter Hitch You have a ball in your truck and are in search of a way to pull your fifth wheel without the entire extra hardware in your bed? Now you’ll be able to use this adapter to convert your RV trailer to be pulled with a goose neck ball. Works with your B&W turn over ball, or any other goose neck hitch with a 2 5/16″ ball. All hardware is included – grade 8 mounting bolts, washers, and lock nuts With 3 different heights (12″, 15″, 17″) you’ll be able to select the one that is best for you. These adapters are built to handle whatever comes down the road. So use the measurements below to come to a decision what will work best for you! -20,000 Pound Rating -Self-centering locking plate -2-5/16″ Ball pocket -Coupler can be pad locked -Attaches to most standard king-pin boxes -Easy Installation Which adapter height is best for you? The best way to figure out the height you wish to have is to back your truck under your camper and set the camper to the desired height from the top of the bed (regularly from 6 to 8 inches). Measure from the top of the ball in your truck to the bottom of the king plate on your camper, match that measurement to the measurements described below to come to a decision which height is right for your setup. 12″ Adapter Hitch – Height from top of ball to top of mounting plate is 11 inches. 15″ Adapter Hitch – Height from top of ball to top of mounting plate is 11 inches. 15″ Adapter Hitch – Height from top of ball to top of mounting plate is 13 inches. If you wish to have a different height than the item you are now viewing click on by T Built below the title above.
The T Built adapter hitch means that you can convert your 5th wheel into a gooesneck. Now you don’t have to have the bed of your truck tied up with a large 5th wheel plate.
Comes with the required hardware and has a total height of 13.5″ or 11″ from the top of the ball to the top of the mounting plate.
12″ Tall
Bolts right on to your 5th wheel plate. Keeps your bed available
Uses a 2 5/16″ ball

Reviews

There are no reviews yet.

Be the first to review “12″ Fifth Wheel to Goose Neck Adapter with 7 3/4″ Forward Offset”

Your email address will not be published. Required fields are marked *